|
| Előadó: | Radycal Hungary |
|---|---|
| Album: | Keressük! |
| Szövegírók: | Keressük a szövegírót! |
| Keressük a zeneszerzőt! | |
| Kiadó: | Keressük! |
| Stílus: | Keressük! |
| Címkék: | Keressük! |
: Dials typically range from 0 to 7 . Setting 7 is the coldest, while 1 is the warmest. "0" Position : This setting turns off the cooling function.
Operating and maintaining your Danby refrigerator ensures it cools effectively and lasts up to 15 years. This guide covers essential setup, temperature control, and defrosting procedures to keep your unit running smoothly.
Most Danby mini fridges use a mechanical thermostat dial located inside the unit.
owner's manual manuel du propriétaire manual del propietario
: Do not place the unit in direct sunlight or near heaters, as this increases electrical consumption and may damage the exterior coating.
: Use the adjustable leg on the bottom to ensure the fridge is level, which helps the door seal properly. Temperature Control
: If the unit was transported on its side, let it stand upright for at least 6 hours before plugging it in to allow the refrigerant to settle.
: For a new unit, set the dial to maximum (7) for 2–3 hours before adjusting it back to your desired level and adding food. Defrosting Instructions
: Dials typically range from 0 to 7 . Setting 7 is the coldest, while 1 is the warmest. "0" Position : This setting turns off the cooling function.
Operating and maintaining your Danby refrigerator ensures it cools effectively and lasts up to 15 years. This guide covers essential setup, temperature control, and defrosting procedures to keep your unit running smoothly.
Most Danby mini fridges use a mechanical thermostat dial located inside the unit.
owner's manual manuel du propriétaire manual del propietario
: Do not place the unit in direct sunlight or near heaters, as this increases electrical consumption and may damage the exterior coating.
: Use the adjustable leg on the bottom to ensure the fridge is level, which helps the door seal properly. Temperature Control
: If the unit was transported on its side, let it stand upright for at least 6 hours before plugging it in to allow the refrigerant to settle.
: For a new unit, set the dial to maximum (7) for 2–3 hours before adjusting it back to your desired level and adding food. Defrosting Instructions
