Datei Herunterladen Drumdigger_phonk_vocals_wav... -

Security settings allow the administrator to configure security-related options without looking for support technicians to help solve security breaches. Using security settings, the administrator can configure safeguards for the application from potential vulnerabilities and security breaches.

You can configure security settings by navigating to Admin > General  > Security Settings.

Role Required: SDAdmin

Contents

• General settings
• Advanced settings
• Password policy
• Security Meter
• Mobile

General Settings:

Configure account lockout threshold and duration: Using this option, you can ensure a user account is locked after a pre-specified number of failed login attempts. You can customize the message to be displayed if the user is locked out due to too many login attempts. This configuration applies to all types of authentication.

To configure account lockout threshold and duration,

1. Enable Configure account lockout threshold and duration.
2. Specify the account lockout threshold.
3. Specify the number of login attempts (N) allowed and the duration to reset a locked user account.
4. Choose whether to lock the user account only on the computer where the login was attempted or any computer.
5. Customize the message to be displayed when the user account is locked.
6. Choose to notify technicians either by email or as a technician space notification in the header.

You can unlock a locked account by clicking the link provided. Alternatively, you can also navigate to ESM Directory >> Users and click Locked Accounts button in the toolbar. A pop-up will display the locked accounts with their domain and IP address. Select the locked account and choose Unlock.

During the (N-1)th failure attempt, i.e. the attempt before the last attempt, captcha authentication will be enforced to ensure that brutal force attackers are not using robots to lock an user account.

Disable Concurrent Login: Using this option, you can restrict concurrent login sessions from different IP addresses. When this option is enabled, concurrent login attempts in various cases will be handled as given below:

• If the user tries to login from a different IP address, the login fails with an error message.
• If the user tries to login from an Incognito Window (In case of Chrome) or a different browser in the same IP address, the user will be logged out from the ongoing session.

Server Port and Protocol Configuration: You can choose whether to run the application in HTTP or HTTPS mode.

• Enable HTTP mode: Specify the default server port where the application has to run.

• Enable HTTPS mode: After specifying the server port, specify the TLS versions and Ciphers to ensure proper encryption of data, preventing hackers from stealing it.

Configure expiry date for "Keep me signed in" feature: You can set the duration the user can be kept signed into the application. On the expiry date, the user has to re-authenticate by entering the login information again. By default, the user has to re-authenticate every 45 days.

Enable Forgot Password: Enable/disable the Forgot Password option on the login page for users who log in via local authentication. Once this option is enabled, users can use the forgot password option on their login page to get a password reset link sent to their primary email address by entering their username and domain. If the email is not configured or if the particular email is configured in multiple profiles, the mail will not be sent. In such cases, the admin can reset the password manually.

To customize the password reset notification email, go to Notification Rules and click Customise template against Send Self-service login details. Modify the subject and message as per requirement. Use the appropriate $ variables to add necessary links like Password reset link and server URL etc. Click Save. To alter the password reset link's validity, please reach out to our support.

Inactive session timeout configuration: Set the duration in minutes after which the user will be logged out of an inactive session from the web and mobile app. You can set the limit between 1 and 1440 minutes.

Enable password protection for all file attachments: You can protect the file attachments stored in your application from unauthorized access by encrypting them at the server level. This will prevent security breaches over the server data. The password is available only to the SDAdmin and can also be used in case of encryption failure.

Advanced Settings:

Add security response headers: Configure security headers to safeguard the application from XSS attacks and other vulnerability attacks.

• Choose the required security response header from the list.
• Enter the response header value.

You can also include or exclude one or more response headers.

Click here, to learn more about Security Configurations.

Enable Domain Drop-down during login:

This option will list the domain names on the login page. If disabled, the domain names will be kept anonymous to anyone apart from the users.

Domain Filtering during Login:

This option will filter the domains listed during login based on the username entered. If disabled, the entire domain list will be displayed, reducing the probability of hackers knowing the domains where a particular user is present. Note that you can enable domain filtering only if domain drop-down in enabled.

Stop uploading scanned XMLs via non-login URL:

By enabling this option, you can make the application unresponsive to unnecessary data upload while receiving scanned XML data from an agent through a non-login URL.

Allow Technicians to generate their own API keys: 

This option enables technicians to generate their API keys for connecting ServiceDesk Plus with third-party applications. If disabled, only the administrator can generate API keys for the technicians.

Disable paste for password fields:

This option will disable users from pasting clipboard data on all password fields in the application.

Disable HTTP compression:

Disabling HTTP compression will prevent BREACH attacks since this type of attack only occurs on data transferred via HTTP compression. However, this will lead to a slight increase in the network's bandwidth and decreased application performance.

Enable antivirus scanning for file uploads:

You can configure your existing antivirus software in ServiceDesk Plus to detect any vulnerable files during file uploads and email attachment receipts. Antivirus software that uses ICAP protocol can only be configured.

To configure an antivirus scan in the application,

1. Go to Admin > Security Settings > Advanced.
2. Click on the checkbox beside "Enable Antivirus scanning for file uploads".
3. Enter the Host Name where the antivirus is installed.
4. Enter the Service Name and the Port of the antivirus tool. This can be found in your Antivirus tool's Settings page.
5. Click Save.

Once configured, the file uploads and attachment receipts will be scanned for vulnerable files.

Some of the antivirus tools that can be configured:

      1. BITDEFENDER_SECURITY_FOR_STORAGE
      2. ESET_FILE_SECURITY
      3. ESET_GATEWAY_SECURITY
      4. KASPERSKY_SECURITY_FOR_WINDOWS_SERVER
      5. MCAFEE_VIRUSSCAN_ENTERPRICE_FOE_STORAGE
      6. MCAFEE_WEB_GATEWAY
      7. SYMANTEC_PROTECHTION_ENGINE_FOR_CLOUD
      8. CLAM_AV_WITH_SQUID

Disable login details banner: Last login information will not be displayed to the users when they log in to the application.

Disable rate limit for all actions and operations: All actions/operations can be performed, regardless of the configured rate limit.

Monitor Suspicious Activities 

To safeguard the application from URL attacks, ServiceDesk Plus provides an option to notify SDAdmins and OrgAdmins whenever the number of attempts to access a URL exceeds the predefined rate limit within a given time frame.

Each URL has a predefined rate limit configured internally. On reaching the rate limit, the connection to the requested URL will be blocked for a specific time frame and notification triggered.

Notifications will be sent to OrgAdmins when URLs are accessed by UI.

Notifications will be sent to SDAdmins when URLs are accessed by integration keys.

The notification includes details such as the URL address, user details used to invoke the URL, description, date/time, IP address of the corresponding machine, Configure Rate Limit option to modify the rate limit of the URL.

To enable the notification,

• Go to Admin > ESM Directory > General Settings > Security Settings.

• Under Advanced Settings, select the Enable push notification for admins when client request rate limit is reached check box.

URL access limit can be modified in two ways:

1. Through notifications

2. By using the URL rate limit violations link

To modify the rate limit from the notifications,

1. Click the bell or push notification.

2. In the displayed window, under Configure Rate limit, click Edit.

3. URL rate limit - Enter the number of requests for the URL.

4. Click Update to save the changes. The information about the last modified user, date, and time is displayed in the same window.

Do the following to modify the rate limit from the URL rate limit violations link next to the Enable push notification for Admins when client request rate limit is reached check box:

1. Click URL rate limit violations to view the complete list of suspicious activities.

2. Select an impacted URL.

3. In the displayed window, under Configure Rate Limit, click Edit.

4. URL rate limit - Enter the number of requests for the URL.

5. Click Update to save the changes. The information about the last modified user and time is displayed.

The rate limit for the same URL can be configured both through the UI and by using integration keys. The rate limit set via the UI by OrgAdmin is independent of the rate limit modified through integration keys by SDAdmin.