Download | Juc7 820 00169579 Condor U55g7300 Firmware Part02 Rar

Navigate to > Settings > System > Software Update > By USB . The TV should detect the file and ask to begin the update. Method 2: Forced Flash (For Boot Loops/Black Screens) Power off the TV and unplug the power cord. Insert the USB drive into the TV's USB 2.0 port.

: Multi-part archives like yours cannot be opened individually. You must download all parts (Part 01, Part 02, etc.) into the same folder on your computer.

Depending on whether your TV is currently functional or stuck on a logo (boot loop), use one of the following methods: Insert the USB drive into the TV's USB port. Navigate to > Settings > System > Software Update > By USB

Continue holding until you see an "Upgrading" bar or the power indicator starts flashing.

Copy the extracted firmware file (usually named MstarUpgrade.bin or similar) directly to the of the USB (do not put it in a folder). 🛠 Installation Methods Insert the USB drive into the TV's USB 2

: Do not turn off the power or remove the USB during this process, as it can permanently damage the main board. 🔍 Finding the Download Link Firmware for Condor models using the JUC7.820.00169579

(or sometimes the CH+ button) on the TV panel, not the remote. While holding the button, plug the power cord back in. Depending on whether your TV is currently functional

: Right-click on the first part (Part 01) and select "Extract Here." This will automatically combine all parts into a single .bin or .img firmware file. Prepare a USB Drive : Use a USB drive with at least 1GB of storage. Format it to FAT32 .