|
|
|
|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
: Use a clean flash drive (maximum 4GB recommended) formatted to FAT32 . Installation Instructions
The firmware is available for download on specialized technician forums like KenotronTV . This file is typically used to repair Vivax Smart TVs (such as model 40LE113T2S2SM ) that are stuck on the logo or experiencing software glitches. Download and Preparation
: Unzip the archive and copy the firmware file (usually named allupgrade_msd338_4G_ref45.bin or similar) to the root directory of your USB drive. Preparation : Power off the TV and unplug it from the wall.
: You can find the USB update files on KenotronTV or similar repair databases like Monitor.net.ru .
: After 3–5 seconds, the LED indicator should begin blinking red and green, signaling the update has started. You can then release the Power button.
: Plug the drive into the USB port (specifically the port furthest from the edge of the case, if applicable).
: Press and hold the Power button on the TV panel, then plug the TV back into the power outlet.
: The TV will automatically enter standby mode (red LED) once finished. Do not unplug the TV or remove the USB drive until the process is complete.
: Use a clean flash drive (maximum 4GB recommended) formatted to FAT32 . Installation Instructions
The firmware is available for download on specialized technician forums like KenotronTV . This file is typically used to repair Vivax Smart TVs (such as model 40LE113T2S2SM ) that are stuck on the logo or experiencing software glitches. Download and Preparation
: Unzip the archive and copy the firmware file (usually named allupgrade_msd338_4G_ref45.bin or similar) to the root directory of your USB drive. Preparation : Power off the TV and unplug it from the wall. Download MS338 PB803 1920x1080 Vivax part1 rar
: You can find the USB update files on KenotronTV or similar repair databases like Monitor.net.ru .
: After 3–5 seconds, the LED indicator should begin blinking red and green, signaling the update has started. You can then release the Power button. : Use a clean flash drive (maximum 4GB
: Plug the drive into the USB port (specifically the port furthest from the edge of the case, if applicable).
: Press and hold the Power button on the TV panel, then plug the TV back into the power outlet. Download and Preparation : Unzip the archive and
: The TV will automatically enter standby mode (red LED) once finished. Do not unplug the TV or remove the USB drive until the process is complete.
