Nissan Qashqai 2010 1.46 Adaptation Access

If you are performing maintenance on a 2010 Qashqai (J10), you must perform these "Learning" steps to ensure a stable idle and proper fuel management. 1. Accelerator Pedal Released Position Learning

This step helps the ECM learn the voltage signal when the pedal is fully released. Engine off, ignition ON for at least 2 seconds. Action: Turn ignition OFF and wait at least 10 seconds. Nissan Qashqai 2010 1.46 Adaptation

Confirm pedal is released. Turn ignition ON (wait 3 seconds). Fully depress and release pedal 5 times within 5 seconds. If you are performing maintenance on a 2010

Fully release pedal within 3 seconds of the light staying ON. Start the engine and let it idle for 20+ seconds. 📋 Common Technical Specifications (2010 Model) Engine off, ignition ON for at least 2 seconds

Wait 7 seconds. Fully depress pedal for ~20 seconds until the stops blinking and stays ON.

Ensures the ECM knows the exact "stop" point of the throttle butterfly. Turn ignition ON. Action: Turn ignition OFF and wait at least 10 seconds.