Sushka Pilomaterialov Shema – Tested & Top-Rated

Spacers must be placed vertically one above the other to prevent the timber from bending under its own weight. 2. The Drying Cycle (Phases)

Industrial drying schemes, particularly in convective kilns, generally consist of four main stages:

Planks are separated by wooden strips (spacers) of uniform thickness to allow air to circulate freely through the stack. sushka pilomaterialov shema

Before drying begins, timber must be sorted by thickness and species. The most important part of the scheme is the :

Timber is stacked under a roof or canopy. It is cost-effective but slow and dependent on weather conditions. Spacers must be placed vertically one above the

The drying of sawn timber () is a critical industrial process designed to remove excess moisture from wood while maintaining its structural integrity and preventing defects like warping or cracking. A standard drying scheme typically follows a structured technical workflow: 1. Preparation and Stacking

Once the target moisture content is reached (typically 8–12% for joinery), the wood is held at a specific temperature to equalize moisture throughout the board. Before drying begins, timber must be sorted by

Uses controlled heat and airflow. It is significantly faster and allows for precise moisture levels required for high-quality furniture or construction.