Ustanovka Sabvufera Instruktsiia Official

Connect the RCA cables from the back of your head unit (radio) to the amplifier. If using a factory radio without RCA outputs, you will need a Line Output Converter (LOC) .

Decide where the subwoofer box will sit (usually the trunk) and where the amplifier will be mounted to ensure adequate ventilation. Phase 2: Wiring the Power Supply ustanovka sabvufera instruktsiia

The power cable is the "artery" of your system and must be handled with care. Connect the RCA cables from the back of

Connect the thin "remote turn-on" wire. This tells the amplifier to wake up only when the radio is turned on, preventing battery drain. Phase 2: Wiring the Power Supply The power

Run the power cable from the battery through the vehicle's firewall. Use an existing rubber grommet to prevent the metal from cutting the wire over time.